Modular design to accommodate various types of telephony interfaces.

Both support SIP and H.323 protocols: SIP Registration and Digest Authentication; H.323 Gatekeeper Registration.

SIP Single Number / Account for multiple ports.

Caller ID Delivery: FXS support DTMF Caller ID generation.

Smart VoIP call Dialing Book: VoIP call Book could provide any application VoIP call to any type destination (Domain name / IP address, PSTN or PBX) or hunting number setting.

AC termination Impedance : 600/900 OHM and complex impedance

Answer Supervision for Polarity Reversal Detection and Voice detection

NAT traversal: This feature allow gateway to operate behind any NAT/Firewall device. Need not to change any configuration of NAT/Firewall like setting virtual server.

 

[Title name=’Description’]By Modular hardware design SB800/S1600/S2400 series makes any combination of the telephone interface. The Soundwin SB800/S1600/S2400 Series VoIP Gateway is fully SIP and /H.323 standard compliant high density gateway that provides a total solution for integrating voice-data network and PSTN. By modular installation, this revolutionary compact voice over IP (VoIP) gateway could be easily configured as 8/16/24 channels high density FXS/FXO VoIP Gateway which provides voice connectivity over the IP network and to the Public Switched Telephone Network (PSTN).

[/Title][Title name=’Features’]
Telephony Specifications

– Voice Codec: G.711(A-law /?-law), G.729 AB, G.723 (6.3 Kbps / 5.3Kbps)
– FAX support : T.30 / T.38
– Echo Cancellation: G.165/G168
– FXS Tone Table Configuration: Support tone frequency and cadence configuration
– FXO hang up detection / anti-seized : Busy Tone Learning Automatically / Manual Busy Tone Learning.
– Answer supervision: Support Battery Reverse Detection and Voice Detection.
– FXO answer delay time: Support delay 0 – 8000 ms to answer.
– Adjustable AC Termination Impedance : 600 / 900 OHM and complex Impedance
– Failsafe Mechanism (FXS relay to FXO):
• Power failed bypass support
• Internet failed bypass (Optional)
• Registered failed bypass (Optional)
• Unconditional bypass (Optional)
– 12K Hz and 16K Hz Pulse Metering
– FXS Battery Revere Generation
– Support MWI (Message Waiting Indicator) by SIP Notify (Optional).

IP Specifications

– H.323 v2/v3/v4 and SIP (RFC 3261) , SDP (RFC 2327), Symmetric RTP, STUN (RFC3489), ENUM (RFC 2916), RTP Payload for DTMF Digits (RFC2833), Outbound Proxy Support.
– LAN : Support Virtual Server, DHCP Server
– WAN: PPPoE client, DHCP client, Fix IP Address, DDNS client
– Network Address Translation: Providing build-in NAT router function
– Smart QoS: Guarantee the voice bandwidth

Call Features

– Voice channels status display
– Direct Dialing Mode : peer to peer call (support IP Address Call or Domain Name Call)
– Register Call Mode : Register to H.323 Gatekeeper or SIP Proxy Server
– Adjustable volume :- 9 db ~ 9 db
– Silence Compression
– Auto Dial for speed
– Dynamic Jitter Buffer

Configuration & Management

– Web-based Graphical User Interface
– Remote managenet over the IP Network
– FTP firmware upgrade
– Backup and Restore Configuration file

General Specification

– Standard 50 pin RJ-21 Telco connectors
– AC power : AC100V-240V, DC12V/1.5A,50/60 Hz
– Temperature: 0°C ~ 40°C (Operation)
– Humidity: up to 90% non-condensing
– Emission: FCC Part 15 Class B, CE Mark
– RoHS Compliant
– Dimension : 440 x 250 x 45 mm
– Weight: 5300 g

LED Indicatiorst

– Power , Reset, WAN, LAN,FXS/FXO

Ordering Information

– S1600: 16FXS, 1 WAN + 1 LAN, Smart-QoS

[/Title]

[Title name=’Datasheet’] p_110724_09367 [/Title] [1234]