The Sangoma A56 Data Board is the alternative to an external router when using a 56kbps Digital Data System Line connection. This card replaces the Sangoma S5145.
– The A56 56kbps DDS hardware is based on the same advanced engineering design as the award-winning AFT Product Line. Trust the Sangoma® name to deliver optimum data support on standard telecommunications networks.
[/Title][Title name=’Features’]Technical Specifications
– One 56/64kbps DDS line interface
– Standard temperature range: 0° – 45°C
High Temperature -40° – +80°C card available
– All set-up and configuration is in software or by machine BIOS
– 56kbps DDS compatible with ANSI T1.410 Bell Pub 62310
– Network or internal clocking for back to back test setups
– Software controlled DSU/CSU test modes
– Remote monitoring of card and CSU/DSU operation
– Dimensions: 120 mm x 55 mm
– All Sangoma’s AFT products share the same base PCI interface card and the same high-quality firmware on the same family of Field Programmable Gate Arrays
– Fully PCI 2.2 compliant, compatible with all commercially available motherboards
– Optimized DMA stream and hardware-level HDLC handling unload the host CPU
– Raw bitstream interfaces can be used to support arbitrary non-standard line protocols such as non-byte aligned monosynch or bisynch
– Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis
– Short 2U compatible mounting clips included for installation in 2U rackmount servers and high-quality, tested RJ45 cable included
– Power: 800mA peak, operational 300mA max at +3.3 V or 5 V
– Autosense compatibility with 5 V and 3.3 V PCI busses
– Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features can be added when they become available.
– 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention
– Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
– WANPIPE® supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25
Operating Systems
– Windows® 2003, Windows® XP, Windows®Server 2008, Windows® Vista
– Linux
Certification
– FCC Part 15 Class A, FCC Part 68, CE
Diagnostic Tools
– WANPIPEMON, SNMP, system logs
Production quality
– ISO 9002
Warranty
– Three years parts and labour
[Title name=’Datasheet’] a56 [/Title] [1234]