A144 Synchronous Quad Seria Board

admin

8 years ago

Now newly redesigned for improved efficiency, the Sangoma A144 Data Board replaces the Sangoma S5142 card. Ideal for synchronous serial applications.

[Title name=’Description’]- Whether you use the card to simplify routing and increase security using Sangoma’s WANPIPE® software; you need support for an X.25 link, a datascope, an SNA connection, or a broadcast satellite feed; or you have another unique application — Sangoma’s Serial Synchronous products communicate mission-critical radar control and surveillance data, essential to modern air and sea communications.

– This updated card boasts field upgradeable firmware, a choice of PCI or PCI Express interface, and four primary ports that have equal baud rates without the complexity of signaling jumpers.

– The A144 Synchronous Quad Serial hardware is based on the same advanced engineering design as the award-winning AFT Product Line.

[/Title][Title name=’Features’]

Technical Specifications

– Four full-speed primary ports supporting either V.35/RS422/EIA530 or RS232 serial interfaces
– High-speed connections: V.35/RS422/EIA530 to 8 Mbps per port. RS232 to 400 kbps per port
– Power: 550 mA at +5 V
– PCI Versions are 32 bit (5 V) and 64 bit (3.3 V) compatible
– Now available in PCI or PCI Express
– Operating temperature range: 0 – 50°C
– Software configurable or by machine BIOS
– Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis

Datascope Features

– All modem control lines are monitored
– Either monitoring only or simulation (transmit and receive)
– Monitoring or simulation of ATM or HDLC at line speeds above 8 Mbps
– Time stamps with a resolution of 100 microseconds or better to allow accurate sequencing of events. Each character can be individually time stamped.

Serial Interfaces

– V.35, RS422 or EIA530, or RS232 supported on all four primary ports
– Clocking: Internally generated or external at line speeds to 8 Mbps
– NRZ, NRZi, FM0, FM1, Manchester encoding
– All ports are RS485 – capable of supporting multipoint lines

Operating Systems

– Windows® 2003, Windows® XP, Windows®Server 2008, Windows® Vista
– Linux (all versions, releases and distributions from 1.0 up)

Line Protocols

– Frame Relay, Transparent bit-stream
– X.25, ATM, PPP, SS7, SDLC are supported on Linux
– HDLC is supported on Windows

Higher Level Protocols

– IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), PPPoE, PPPoA, IP over ATM

Diagnostic Tools

– WANPIPEMON®, System logs

Certification

– FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class A, CIPSR 24, AFIC-S016, IEC 60950

Production quality

– ISO 9002

Warranty

– Lifetime warranty on parts and labour
– PLUS 30-day “no questions asked” return policy

[/Title]

[Title name=’Datasheet’] a144 [/Title] [1234]