Eight-Span T1/E1/J1
Eight spans of T1, E1 or J1 available on convenient PMC mezzanine card – the ultimate high-density solution.
– The A108-PMC supports up to 16.4Mbps of full duplex data throughput or up to 240 voice calls using up to eight T1,E1, or J1 lines.
– With Sangoma cards, you can take advantage of hardware and software improvements, as soon as they become available. The A108-PMC, like all cards in Sangoma’s AFT family, is field-upgradable with crash-proof firmware.
[/Title][Title name=’Features’]
Technical Specifications
– Eight T1/E1 spans with optimum PMC interface for high performance voice and data applications
– Support for Asterisk®, Yate® and FreeSWITCH® PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications
– Shares same hardware and driver design as Sangoma’s award-winning AFT products
– Dimensions: 90 mm x 150 mm
– Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available
– Line decoding: HDB3, AMI, B8ZS
– Framing: CRC-4, Non CRC4, ESF, SF, D4. Also compatible with Japan’s J1
– Maximum operational power: 7.5W ( 2.3A @ 3.3V)
– Temperature range: 0 – 50 °C
– 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
– Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
– Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI
– T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
– Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
– Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
– WANPIPE® routing stack is completely independent of TDM voice application for total system reliability
– WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25
– Impedance: Configurable to 75ohms or 120ohms
Operating Systems
– Windows® 2003, Windows® XP, Windows® Server 2008, Windows® Vista, Windows® 7
– Linux (all versions, releases and distributions from 1.0 up)
T1/E1 Status Alarms
– RED: Telco Red Alarm Condition
– OOF: Out of Frame
– LOS: Receive Loss of Signal
– AIS: Alarm Indication Signal
– RAI: Remote Alarm Indication (Yellow Alarm)
Line Protocols
– Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC
Higher Level Protocols
– IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE,PPPoA, IP over ATM
Certification
– FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950, JATE
Diagnostic Tools
– WANPIPEMON, SNMP, system logs
Production Quality
– ISO 9002
Warranty
– Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy.
[Title name=’Datasheet’] a108_pmc [/Title] [1234]